1.Feeding part:Lead feeder:On the basis of the front side of the cardboard,the speed of roller’s feeding paper is the same as feeding roller, It is not affected by the width of board cutting width, and the location of printing and slotting is accurate.Controled by PLC.
aThe diameter of roller is 480mm(include printing plate)
bRoller’s surface is grinding, chromium hard plating, balance correction, smooth operation, suitable for high speed operation,
cThe level of the drum surface direction and circumferential direction of engraving reference lines, convenient for aim plate.
d.Adjustment is controled by PLC.
e.Printing down roller:
A.Its diameter is 176mm, roller’s surface is grinding, chromium hard plating, balance correction, making sure smooth operation.
B.The gear is adjusted by cross slider without gap,which does not affect the gear meshing and ensures the transmission precision.
3.Up and down feeding paper roller:
A. up roller: the diameter is 86mm, thick seamless steel pipe, with three paper feeding rings.
B. down roller: the diameter is 176mm, thick seamless steel pipe, surface grinding, chromium hard plating.
C. The gear use cross slide block adjustment, which does not affect the gear meshing, ensure the transmission precision.
4.Destruction of the wheel shaft:paperboard pre pressing device before the molding, so that the carton is better.
A. The diameter is 200mm,and the brand is Jizhou.
B. The rubber roller surface is wrapped with resistant rubber, and corrected balance.
C. rubber roller is grinded by special way, make sure the transfer of the ink is good.
D. overrunning clutch and automatic turning device.
E.The ink can be adjusted in a little range and self locked to ensure ink uniformity.
A. The diameter is 216mm and the cable is 280.
B. The surface of the roller is grinded, and the chromium hard plating.
C. The pneumatic automatic lifting of the paper feeding system. (feeder roller drop ink to the roller, when stop feeding, roller rising and plate separation to ensure the printing effect)
D. the roller with the wedge type overrunning clutch (using the Taiwan technology motor synchromesh belt to directly drive the anilox roller, reduce noise and prevent the impact of vibration on printing effect and printing accuracy).
7.Phase adjustment mechanism
A.Planetary phase mechanism
B.PLC display control, when operating state can be 360 degree positive and negative adjustment.
B. When the unit or phase of the unit is adjusted, the brake system limits the rotation of the unit and keeps the original gear meshing point to be constant.
10.Die cutting part:
A.The rubber rolller adopts imported rubber pad, it can lifting by the pneumatic ,so the idling and phase adjustment is not easy to damage the rubber pad.
B.Work with bubber shaft automatic shift, rotary die cutting automatic conversion, cut mark do not repeat, improve the working life of the rubber pad
C.Equipped with a free plate ring, quick adjustment of the box high, save time and template cost
D.Die-cutting roller with imported knife , and in the design of fixture, convenient installation.
E.Using the back - out paper form, PLC electric phase adjustment, easy to use.
F.The main gear thickness of the transmission part is 50mm, the thickness of the rubber roller is 30mm, the thickness of the die cutting roller is 45mm. 45# steel parts are quenched by high frequency. Automatic spray lubrication to ensure mechanical precision and life
G.Adjusting pressure by using a turbine box
H.Adjust the control in the working face, save the time of adjustment.
A.The paper arm can be operated manually or automatically, with an insurance mechanism to prevent the paper arm from falling suddenly and to ensure the safety of the operator.
B.The lift is driven by a strong chain
C.With the height of the board, the tilt height is automatically adjusted. The lift motor has brake function. The bed table keeps fixed position and will not slide.
D.Pneumatic lifting plate mechanism, piled up to a predetermined height in the cardboard, paper tray will automatically open and support board.
E.Plane wrinkled belt to prevent paperboard from falling
12.The main parts
A.The transmission gear is 45# steel with helical quench treatment, and the thickness is 50mm.
B.Spray lubrication, automatic starting oil to ensure the transmission gear precision in a long time.
C.The whole machine adopts the key - free connection to ensure the reliability and stability of the connection precision.
The main technical parameters
Maximum design speed
100pcs / min
Max printing area
Adapt to the thickness of cardboard
Adapt to plate thickness
The power of the main motor
The brand of main parts
Packaging & Shipping
1 Plastic film package normally
2 If special packaging, pls tell us
3 Shipping: FOB, CNF&CIF
Sales and After-Sales Service
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
Q: Are you factory or trading company ? why choose us? A:we are professional manufacturer factory for carton box making machinery.Our factory has professional produce many kinds of carton box Making machinery for more than 20 years, our machines has export To many countries abroad, We have an experienced production research and development and after-sales service team! Q: what is your machine Warranty period? A: We insist only produce high quality machine with best price, We never produce low quality machine with lowest price,So we trust our machine quality well, we promised all of the Machines we produce the warranty period is 24 months.Because we believe our machine quality, so we dare to Extended warranties! Q:How about the packing of products. A:Tighten to container with steel wire rope and welded machine withcontainer by angel iron B. Main corrugated box machines and uncoiler is packed with waterproof plastic) C. PLC contral system and motor pump are packed in wooden box with water proof paper coverage. Q:how about the delivery time? A:Normal standard machine we have store, if no store delivery time will be within 30 days. Q: Where is your main market? A: Our products are exported to more than 30 countries and regions,Mexico,Spain, Russia,Canada,Poland,Georgia,Bolivia,Hungary, Pakistan, Uzbekistan,Ukraine,Kyrghyz,Argentina,Venezuela, Egypt,Bulgaria,Brazil, Australia, Philippines, Indonesia,Australia, Algeria, Sri Lanka,Bengla, Saudi Arabia,Syria,Turkey,Ethiopia and so on. Q: We do not know how to operate machine,how to deal? A.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,accommodation,food and transposition in your country B.You can send your men to our factory. we will teach them how to operate the machine without training charges C.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manual first ,and get familiar with the machine. Then we can get a video call,and teach you on-line how to operate the machine. Q: If the machine has some problems,during we using ,How to deal? A:24 months for the whole machine. Within 24 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free.Out of 24 months, you will get spare parts at cost price. You will also get technical support and service all the lifetime.